Fire Resistant – Resistant to Fire alone

Test apparatus comprising of Cable support system, a Circuit Continuity checking and voltage withstand arrangement and a source of heat

Conforms to BS 6387 protocol C, IEC 60331-11, IEC 60331-21

Fire Resistant – Fire with Water

Test apparatus comprising of Cable support system, a Circuit Continuity checking and voltage withstand arrangement, a source of heat and a water spray

Conforms to BS 6387 protocol W

Fire Resistant – Fire with Mechanical Shock, Fire with Mechanical Shock and Water

Test apparatus comprising of Cable support system, a Circuit Continuity checking and voltage withstand arrangement, a shock producing device, a water jet device and a source of heat

Conforms to BS 6387 protocol Z, BS 8491, BS EN 50200, BS 8434-2, IEC 60331-1, IEC 60331-2, IEC 60331-3

3 Meter Cube Smoke Test Apparatus

The 3 Metre Cube is used for measuring smoke emission when electric cables are burned under defined conditions, for example, a few cables burned horizontally. The equipment comprises a cubic enclosure and a photometric system.

Conforms to BS EN/ IEC 61034-1&2

Acid Gas Test Apparatus

To determine the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring the pH and conductivity.

Conforms to BS EN / IEC 60754-1&2

Flammability Test Apparatus

To determine the resistance to vertical flame propagation for a single vertical insulated conductor or cable.

Conforms to IEC: 60332 Part 1

Flammability Test Apparatus

Test for assessment of vertical flame spread of vertically mounted bunched cables or wires.

The Test Apparatus comprises of a 4m x 2m x 1m Chamber duly insulated. The Equipment is provided with a Ribbon Type Burner with Stand & Ladder. The quantum of gas is controlled & measured by means of a Flowmeter provided to air & fuel gas repectively.

Conforms to IEC-60332 Part 3

Ask about our Product

27-30