GO product range   We at Gulf Cable always aim for the best. While most of the Cable Manufacturers in Gulf and Middle East region settled for ISO 9002, we stand out with ISO 9001 which recognizes our ability for Design & Development as well. As a philosophy, our commitment to customers does not end with a sale. We also offer a host of related services before and after the sale. These include:

	Application Engineering service for selection of appropriate product best suiting the end use.
	An extensive range of cables, single core wires, flexible cords, bare & insulated conductors manufactured to stringent Quality Standards going beyond international specifications.
	Design and Development of products tailored to meet specific requirements of the application.
	To help the customers understand the product intricacies and its performance levels.

NOTE 1:
The following list tabulates only the "standard" products. For any product not listed below. Please do not hesitate to contact our sales & marketing division. We shall be too pleased to meet your specific requirements.

NOTE 2:
Voltage Rating.

Two distinct systems of voltage designation are generally in use. Equivalence between these two systems based on insulation thickness and maximum value of highest system voltage is as tabulated below:

Where:

From the above tabulation, equivalent iec/bs designation can be determined for any system as appropriate.

NOTE 3:
The following list tabulates only the "standard" products. For any product not listed below, please do not hesitate to contact our sales & marketing division. We shall be too pleased to meet your specific requirements.

PRODUCT		STANDARD
Medium Voltage Power Cables up to 30 KV
	XLPE insulated, single core or multicore armoured or unarmoured cables	IEC 60502 / BS 6622
Low Voltage Power Cables 600/1000 V
	PVC Insulated PVC sheathed armoured / unarmoured cables	BS 6346 / IEC 502
	XLPE insulated PVC sheathed armoured / unarmoured cables	BS 5467 / IEC 502
	PVC or XLPE insulated PVC sheathed armoured / unarmoured auxiliary cables	BS 6346 / BS 5467 / IEC 502
Control Cables 600 / 1000 V
	PVC insulated, shielded or non shielded control cables upto 91 cores	BS 6346 / IEC 502
	XLPE insulated, shielded or non shielded control cables upto 91 cores	BS 5467 / IEC 502
Telephone, Communication & Instrumentation Cables
	PE insulated, star quadded, fully Colour coded telephone cables of armoured, unarmoured or self supporting type	MOC standards
	16 core or 34 core pilot cables to be used alongwith underground power lines 11 KV, 132 KV and beyond	MEW / ESI Standards
	PE insulated pilot cables	ESI Standards
	PE insulated communication cables and telemetry cables	MEW / ESI Standards
	PVC insulated internal telephone cables	MOC Standards
	Coaxial and data transmission cables	Gulf Cable / Customer Standards
	PVC or PE insulated, screened or unscreened, armoured or unarmoured instrumentation cables	BS 5308 / IEC 502
Bare Conductors for Overhead Lines
	Aluminium conductors steel reinforced ACSR	BS 215 Part 2 / ASTM / CSA / DIN
	All aluminium conductors AAC	BS 215 Part 1 / ASTM / CSA / DIN
	Hard drawn bare copper conductors HDBC	BS 7884
Earthing Conductors
	Untinned or tinned bare copper conductors SDBC	BS 6360 / IEC 228
PVC or XLPE insulated Conductors
	PVC or XLPE insulated conductors for earthing or overhead lines	BS 6485 / Customer Standards
Domestic Applications / Internal Wiring
	PVC insulated non sheathed single core wires	BS 6004 / BS 6231
	PVC insulated PVC sheathed single or multicore cables	BS 6004
	PVC insulated PVC sheathed flexible cords	BS 6500 / BS 6141 / BS 6004
	PVC insulated PVC sheathed twin flat cables and cords with or without circuit protective conductors (ECC)	BS 6004
	PVC insulated parallel twin cords	BS 6500
Miscellaneous Applications
	Welding cables with copper conductor and insulated with rubber based compound	BS 638
	Fire survival cables	IEC 502 / IEC 331
	Air port lighting cable	Customer Standards
	Irrigation Cable	UL 493
	cold pour resin compound and cable joints in the voltage range up to 1000 V AC and 1500 V DC	BS 6910